You surely know how tough it is to make a TRUE MATTE PETG. Inherently, its a shiny plastic, so to obliterate that sheen is more than difficult. So we went about it another way and VOILA... the proof is in the pudding! There's not a reflection to be had (particularly good if you're printing Medusa!!!)
We’re on to something VERY special, folks! This Matte PETG is a game changer and won’t damage your nozzle! We sold out at MRRF2023 in Goshen, IN! More colors are on the way.
Since the formulation is a little different, you should DEFINITELY print this filament slower than the typical GreenGate3D product. Aim for 60mm/s. MOST IMPORTANT: DRY THE HECK OUTTA IT!!! Like 12 hours at 60C and if possible, run it inside a dehydrator. Its a sponge, but the outcomes are AWESOME!
100% Recycled PET-G!
Made In America: Resin, Pigment and Extrusion!!!
- 1.75 mm +/- .05 mm
- 2.2 net pounds (a full 1 Kg net)
- Print Temperature: 230°C - 240°C
- Bed Temperature: 80°C
- FULLY Recycled
- Environmentally Conscious
- Odorless
- Generous Flexibility
- Unmatched Layer Adhesion
- NEVER Subject to Tariffs, because it's made HERE in America!
GreenGate3D: Recycling The World's Plastics, One Filament At A Time.
View MSDS here